The cordless
ppm10xx BT GNSS Sensor
The universal GPS system for all your tasks.
Capture 3D data
even easier and more simply

ppm10xx BT Sensor
wireless connections

Tree inspections
Reliable positions even under thick foliage.

Healthcare sector
Detect water sources with centimeter precision even in remote locations.

Playrounds
Keep exact records of regular inspections.
The unbelievable ease of measurement.
ppm10xx BT with short antenna
The GNSS L1/L2 Helix antenna ensures excellent almost all-round reception. The flexible gooseneck enables optimized alignment of the GNSS antenna on a tablet.
235 g
(receiver + short antenna)

RTK-System.

Reliable 3D coordinates.
Accurate to the centimeter.

The ppm10xx GNSS receiver has been validated by the European Commission (JRC) for area measurement and found to be compliant with the current directive no. 809/2014 (EU, InVekos).
The 10xx GNSS receiver has been validated in the “autonomous” and “DGPS” measurement methods.
In both measurement methods, the receiver remained far below the required accuracy and was classified in the highest class 0.5.
This means that the ppm10xx can be used for area measurements in accordance with the InVekos regulation.
GNSS system
Multi-constellation and multi-frequency receiver with
- GPS
- GLONASS
- GALILEO
- BEIDOU
- SBAS
- Output rates: up to 20 Hz
Device features
USB port: 1 × USB
Bluetooth
rechargeable battery
GNSS antenna connection: TNC socket (5V – max. 50mA)
Accuracy 1
- RTK Fixed (m): 0,01 + 1 ppm
- GNSS only (m): 1,5
- DGPS (m): 0,3
Specifications
- Power input (V DC): 5 or 9-36 optional
- Power consumption (watts): < 0,5
- Operating temperature (°C): -20 to +70
- Weather resistance: IP54 (optional IP65)
- Size (mm): 125 × 30 × 55
- Weight (g): 130
1) Accuracy depends on atmospheric conditions, signal multipath effects, satellite geometry and available corrections and their quality. Position accuracies apply to attitude accuracies. The height deviation is normally less than twice the position error. The performance data applies to at least five satellites and use in accordance with the manual. In areas with high signal multipath effects, poor satellite geometry (high DOP values) and at times of difficult atmospheric conditions, performance may decrease.
Datasheet: ppm10xx BT GNSS Sensor

The ppm Commander software
With the ppm Commander, you have software at your disposal that takes care of all GPS hardware settings and configurations relating to GPS surveying.

CONFIGURATION
of your GPS/GNSS receiver according to your requirements.

CORRECTED DATA
are received and evaluated via NTRIP over the Internet.

TRANSFORMATION
into the local coordinate system you require.
We support online transformation (via RTCM stream) or local geoid files.

DATA TRANSFERS
of the corrected (e.g. RTK) and transformed data via virtual serial port to your application software, and/or via Windows’ localization manager.
Under Android via pseudo-location or via a data provider that can be integrated into the application app.
Our software recommendation

SUN-MOBIL
Mobile data acquisition software from the Geoinformation Center Schwing & Dr. Neureither.
The app offers extensive options for the mobile recording of data. In addition to intuitively usable data entry forms, a map view is available in which the objects are displayed.
Users can also use the map to navigate directly to an object.
The device camera can also be used to create comprehensive photo documentation.
A new approach for the 3D recording of supply lines.
This is just a small selection of compatible software packages.
– Precision made in Germany –