EMP-Ableiter

Serie 3403 Fine Protector – ( Blitzschutz )

Datenblatt: Fine_Protector

Die Gaskapsel Feinprotektoren aus der Serie 3403 von Huber+Suhner sind eine spezielle Gruppe von EMP-Ableitern, die besonders für Anwendungen mit geringer DC Spannungsversorgung über Koaxialkabel einen sehr hohen Schutz leisten.

Sie bieten eine extrem effektive Spannungsstoßreduzierung. Dies ermöglicht den Schutz selbst von besonders empfindlichen Mikroelektronikkomponenten, z.B. von permanent installierten GPS Systemen.

Typical residual pulse for Series 3403 (test pulse 4kV/2kA, 5/20 µs)

Residual pulse voltage: bypass voltage +20%
Residual pulse energy: 6 to 12 µJ

Features

  • basic principle: lightning protector with gas capsule and secondary protection enhancement circuit
  • broadband operation
  • essentially increased protection compared to standard gas capsule protectors
  • AC/DC powering via coax possible (bypass feature)
  • current-handling capability 30 kA once and 20 kA multiple
  • residual surge pulse energy reduced by about factor 100 compared to standard gas capsule protectors.
  • gas capsule preinstalled (73 Z00548, 90 V)
  • waterproof IP 65

Electrical Specifications

  • Impedance 50 Ohm
  • Frequency Range 650 – 2500 MHz
  • Return Loss (1) 20,8 dB min.
  • Insertion Loss (1) 0.5 dB max.
  • RF power transmission 50W max.
  • DC bypass current 3 A
  • DC bypass voltage 15 A
  • Surge-current-handling capability 30 kA once and 20 kA multiple (8/20 µs test pulse)
  • Residual pulse voltage and energy 6 µJ typically (test pulse 4 kV 1.2/50 µs / 2 kA 8/20 µs) refer to the diagram above

Mechanical and Environmental Specifications

  • Weight 330 g
  • Coupling nut torque force According to IEC/MIL
  • Durability (matings) 500 min.
  • Mounting hole diameter 19mm / ¾”
  • max. Bulkhead mounting torque force 20 Nm / 14.7 ft-lb
  • Larger than 19mm 35 Nm / 25.8 ft-lb
  • Operating temperature range – 40°C to + 85°C / – 40°F to + 185°F
  • Waterproof degree IP65(according to IEC60529, data refer to the coupled state)
  • Temperature shock MIL-STD-202, Meth. 107, Cond. A, – 55°C / + 85°C
  • Moisture resistance MIL-STD-202, Meth. 106, 10 cycles
  • Vibration MIL-STD-202, Meth. 204, Cond. A, 10G, 10 – 500 Hz

PRODUKT: EMP Ableiter